Since they are on the same circuit, you will want to switch the running lights to LED as well when installing the # CE44VR. Mixing the two has a tendency to cause problems with the lights functioning, and it is definitely important to have working lights on your motorhome.
As far as the wires go, this light has 6 wires coming out of the back. The red wires are stop and turn signals, the black are the running light/tail light, the purple is the reverse light, and the white is the ground.... view full answer...
For your 2017 Winnebago Vista 35LX built on a Ford F-53 chassis the correct air spring suspension kit would be the Air Lift part # AL57344. There is drilling required but there isn't a similar option that does not require drilling. view full answer...
For your 2016 Winnebago Vista LX 35F on a Ford F53 22,000lb chassis you will need the SumoSprings Rebel Custom Helper Springs # SSF-170-40-2 for the front suspension. For the rear suspension you will need the SumoSprings Maxim Custom Helper Springs # SSR-180-54-1.
If you are looking for the best ride quality and to reduce the body roll you will also want to replace your front sway bar with the Roadmaster Front Anti-Sway Bar # RM-1139-148 and add the Roadmaster Rear Anti-Sway Bar # RM-1139-149.... view full answer...
Hey Alan, we have air bag kits that fit your 2016 Winnebago Sunstar LX that is built on a Ford F-53 chassis with the Air Lift kit part # AL57344 which can provide you with up to an additional 5,000 lbs of support and is compatible with your 18k GVWR as well. If you need further info just let me know. view full answer...
The correct rear SumoSprings kit for your 2016 Winnebago 27N is the part # SSR-184-40-1. This will do a great job providing more support to the rear suspension which will allow it to be easier to track and reduce sway. view full answer...
For your 2017 Winnebago Vista LX 30T, I recommend the Tekonsha Prodigy P3 # 90195 for a brake controller. This is a proportional controller that utilizes an internal sensor to capture deceleration as well as utilizes your brake light signal to ensure your trailer brakes are applies with the same intensity and at the same time you hit your brake pedal.
You will simply need the wiring adapter harness # 3035-P to install your electric brake controller quickly and easily. You will plug one... view full answer...
If you take a look at the accompanying photo you can see the roll pins that come with the Replacement Aluminum Ladder Rung for Stromberg Carlson RV Ladders # 8538-T.
This rung is designed to work with Stromberg Carlson RV Exterior Ladder # LA-401 as well as Stromberg Carlson RV Bunk Ladders # LA-460 and # LA-466. view full answer...
It sounds like you are more likely having and issue with your tow bar wiring rather than the Demco SBS Air Force One Supplemental Braking System # SM99243. You can test this by testing your Air Force One system. Depress the break and verify that the LED indicator light is coming on and that the actuator is pulling the brake pedal in your towed vehicle. If that is happening, then the Air Force One is working properly. The Air Force One is not what provides power to illuminate your brake... view full answer...